===== CAN MODE =====

This command, can be used to manage can bus connection mode, accordingly with adopted phisical connection of Carberry.\\

==== Synopsis ====

  CAN MODE [<argument>]

==== Arguments ====

|<none>  | Used to get actual connection mode setup.\\ Returns actual connection mode, followed by OK.|
|SERIES  | Used to setup series mode, if you have connected Carberry CAN buses in series, for example between steering wheels controls and OEM radio.\\ Returns only OK.|
|PARALLEL| Used to setup parallel mode, if you have connected Carberry CAN buses in parallel, for example CAN #1 behind the OEM radio and CAN#2 on the OBD socket.\\ Returns only OK.|
|USER| Used to setup user mode, to freely receive and transmit over CAN bus or use OBD subsystem.\\ Returns only OK.|

==== Examples ====

Getting actual CAN bus connection mode:

  CAN MODE
  SERIES
  OK

Setup parallel mode for CAN BUS diagnostic purpose:

  CAN MODE PARALLEL
  OK


==== Notes ====
  - Be sure to setup MODE accordingly with your hardware setup!\\
  - The SERIES mode, relays CAN bus messages from one CAN to the other and vice versa!