===== Raspbian based SD image =====

Step by step guide from raspbian to "carbian".

==== Getting raspbian image ====

Prepare an SD card with a standard raspbian image.\\
Download latest raspbian image http://downloads.raspberrypi.org/raspbian_latest from Raspberry Pi site.

=== For Windows users ===

Reflash a minimun 4Gb SD card with the previous downloaded image, using for example with [[http://sourceforge.net/projects/win32diskimager/|Win32 Disk Imager]] tool.

=== For Linux users ===
  
Find the name of the device of the plugged in SD-card.\\
For instance, type before and after plugging in the sd-card:

  ls -la /dev/sd*

If you see the date of ''/dev/sdc'' change, that was the one.\\
Find the place of the unzipped image, which was for example ''/home/username/Downloads/2014-01-07-wheezy-raspbian.img''.\\
Type the following command:

  sudo dd if=/home/username/Downloads/2012-10-28-wheezy-raspbian.img of=/dev/sdc 
  
Wait for the command to return. It may be quite a while.

==== Poweron Raspberry Pi ====

Insert SD into Raspberry Pi.\\
Unplug Carberry from Raspberry Pi.\\
Power on Raspberry Pi with a standard usb power supply.\\
Wait for console prompt.

==== Configure raspbian ====

Following Raspberry Pi Software Configuration Tool (raspi-config), adjust as you prefer your new setup.\\
Maybe you are interested to this changes:

  * Expand Filesystem
  * Change User Password
  * Internationalization Options
    * Change Locale
    * Change Timezone
    * Change Keyboard Layout

Select //Finish//, so exit and reboot.

  sudo reboot
  
  
 

==== Prepare UART ====

Follow this [[carberry:rpi:uart:approach|guideline]] to setup raspberry UART port.
==== Install daemons ====

Install some linux daemons 

=== Shutdown daemon ===

To let Carberry properly to shutdown Raspberry Pi, you need to install the shutdown daemon.\\
Follow this [[carberry:rpi:daemons:shutdown|guideline]] to install the daemon.\\

=== Carberry daemon ===

To let Carberry properly to shutdown Raspberry Pi, you need to install the shutdown daemon.\\
Follow this [[carberry:rpi:daemons:carberry|guideline]] to install the daemon.\\

=== Image Backup ===

Backup your image, to reflash it, if necessary.