MFI WRITE
With WRITE command you can write one or more location/s in the Apple MFI Coprocessor fitted on Carberry.
Synopsis
MFI WRITE <ADDR> <DATA>[<DATA>]
WRITE accepts at least two parameters as:
Param | Description | Range |
<ADDR> | MFI location address in HEX notation where start to write. | 0x00 - 0x58 |
<DATA> | Data byte to write | 0x00 - 0xFF |
[<DATA>] | Other optional bytes to write in sequence | 0x00 - 0xFF |
Notes
- In the command parameters, if you write more than one byte you must omit “0x” before data parameters.
- Multiple data bytes must be always represented by two characters, whithout spaces from each other.
Return
WRITE command returns OK.
Examples
Writing one byte
MFI WRITE 0x50 0xAA OK
Writing eight bytes
MFI WRITE 0x50 1122334455667788 OK
Verify
MFI READ 0x50 0x08 1122334455667788 OK